vishay siliconix DG2715, dg2716 document number: 72740 s11-0303-rev. c, 28-feb-11 www.vishay.com 1 low-voltage, 0.4 ? r on , single spst analog switch features ? low voltage operation (1.6 v to 3.6 v) ? low on-resistance - r ds(on) : 0.4 ? at 2.7 v ? off-isolation: - 57 db at 1 mhz ? fast switching: 25 ns t on ? low charge injection - q inj : 9 pc ? low power consumption: < 1 w ? sc-70 5-lead package benefits ? high accuracy ? high bandwidth ? ttl and low voltage logic compatibility ? low power consumption ? reduced pcb space applications ? mixed signal routing ? portable and batte ry operated systems ? low voltage data acquisition ? modems ? pcmcia cards description the DG2715, dg2716 are low voltage, single supply, dual spst analog switches. designed for high performance switching of analog signals, the DG2715/2716 provide low on-resistance (0.4 ? at + 2.7 v), fast speed (t on , t off at 17 ns and 14 ns) and the ability to handle signals over the entire analog voltage range. when operated on a + 3 v supply, control pins are compatible with 1.8 v digital logic. additionally, on-resistance flatness and matching (0.05 ? and 0.1 ? ) offer high accuracy between channels. built on vishay siliconix?s low voltage submicron cmos process, the DG2715, dg2716 were designed to offer solutions that extend beyo nd audio/video functions, to providing the performance required for today?s demanding mixed-signal switching in portable applications. the DG2715 contains a normally open (no) switch, and the dg2716 contains a normally closed switch. an epitaxial layer prevents latch-up. all switches conduct equally well in both directions when on, and block up to the power supply level when off. as a committed partner to the community and the environment, vishay siliconix manufactures this product with the lead (pb)-free device terminations. for analog switching products manufactured with 100 % matte tin device terminations, the lead (pb)-free ?-e3? suffix is being used as a designator. functional block diagram and pin configuration v+ in 1 2 3 5 top view com no gnd 4 sc-70-5l device marking: f7 DG2715 v+ in 1 2 3 5 top view com nc gnd 4 sc-70-5l device marking: f6 dg2716 truth table (DG2715) logic switch 0 off 1on truth table (dg2716) logic switch 0 on 1off ordering information temp. range package part number - 40 c to 85 c sc70-5 DG2715dl-t1-e3 dg2716dl-t1-e3 www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com 2 document number: 72740 s11-0303-rev. c, 28-feb-11 vishay siliconix DG2715, dg2716 notes: a. signals on nc, no, or com or in exceeding v+ will be clamped by inte rnal diodes. limit forward diode current to maximum curr ent ratings. b. all leads welded or soldered to pc board. c. derate 3.1 mw/c above 70 c. absolute maximum ratings parameter limit unit reference v+ to gnd - 0.3 to + 4 v in, com, nc, no a - 0.3 to (v+ + 0.3 v) continuous current (no, nc and com pins) 200 ma peak current (pulsed at 1 ms, 10 % duty cycle) 300 storage temperature (d suffix) - 65 to 150 c power dissipation (packages) b 5-pin sc-70 c 250 mw specifications (v+ = 1.8 v) parameter symbol test conditions otherwise unless specified v+ = 1.8 v, 10 %, v in = 0.4 v or 1.0 v e temp. a limits - 40 c to 85 c unit min. b typ. c max. b analog switch analog signal range d v no , v nc , v com full 0 v+ v on-resistance r on v+ = 1.8 v, v com = 0.9 v i no , i nc = 10 ma room full d 0.7 1.5 2.0 ? switch off leakage current f i no(off) i nc(off) v+ = 2.0 v, v no , v nc = 0.2 v/1.8 v, v com = 1.8 v/0.2 v room full d - 1 - 10 1 10 na i com(off) room full d - 1 - 10 1 10 channel-on leakage current f i com(on) v+ = 2.0 v, v no , v nc = v com = 0.2 v/1.8 v room full d - 1 - 10 1 10 digital control input high voltage v inh full 1.0 v input low voltage v inl full 0.4 input capacitance d c in full 4 pf input current f i inl or i inh v in = 0 or v+ full - 1 1 a dynamic characteristics tu r n - o n t i m e d t on v no or v nc = 1.5 v, r l = 50 ? , c l = 35 pf figures1 and 2 room full d 24 36 ns turn-off time d t off room full d 21 33 charge injection d q inj c l = 1 nf, v gen = 0 v, r gen = 0 ??? figure 3 room 13 pc off-isolation d oirr r l = 50 ?? , c l = 5 pf, f = 1 mhz room - 57 db n o , n c off capacitance d c no(off) c nc(off) v in = 0 or v+, f = 1 mhz room 78 pf channel-on capacitance d c on room 93 www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 72740 s11-0303-rev. c, 28-feb-11 www.vishay.com 3 vishay siliconix DG2715, dg2716 notes: a. room = 25 c, full = as determined by the operating suffix. b. the algebraic convention whereby the most negative value is a minimum and the most pos itive a maximum, is used in this data sheet. c. typical values are for design aid only, not guaranteed nor subject to production testing. d. guarantee by design, nor subjected to production test. e. v in = input voltage to perform proper function. f. guaranteed by 3 v leakage testing, not production tested. stresses beyond those listed under ?absolute maximum ratings? may cause permanent damage to the device. these are stress rating s only, and functional operation of the device at these or any other conditions beyond those indi cated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extended per iods may affect device reliability. specifications (v+ = 3.0 v) parameter symbol test conditions otherwise unless specified v+ = 3 v, 10 %,v in = 0.5 v or 1.4 v e temp. a limits - 40 c to 85 c unit min. b typ. c max. b analog switch analog signal range d v no , v nc , v com full 0 v+ v on-resistance r on v+ = 2.7 v, v com = 1.5 v i no , i nc = 100 ma room full 0.4 0.6 ? r on flatness r on flatness v+ = 2.7 v, v com = 0.6 v, 1.5 v, 2.1 v i no , i nc = 100 ma room 0.1 0.2 switch off leakage current i no(off) i nc(off) v+ = 3.3 v, v no , v nc = 0.3 v/3 v, v com = 3 v/0.3 v room full - 1 - 10 1 10 na i com(off) room full - 1 - 10 1 10 channel-on leakage current i com(on) v+ = 3.3 v, v no , v nc = v com = 0.3 v/3 v room full - 1 - 10 1 10 digital control input high voltage v inh full 1.4 v input low voltage v inl full 0.5 input capacitance d c in full 5 pf input current i inl or i inh v in = 0 or v+ full - 1 1 a dynamic characteristics tu r n - o n t i m e t on v no or v nc = 1.5 v, r l = 50 ? , c l = 35 pf figure 1 room full 17 29 ns turn-off time t off room full 14 26 charge injection d q inj c l = 1 nf, v gen = 0 v, r gen = 0 ? , figure 3 room 9 pc off-isolation d oirr r l = 50 ?? , c l = 5 pf, f = 1 mhz room - 57 db no, nc off capacitance d c no(off) c nc(off) v in = 0 or v+, f = 1 mhz room 72 pf channel-on capacitance d c on room 92 power supply power supply range v+ 1.5 3.6 v power supply current i+ v+ = 3.6 v, v in = 0 or v+ 0.01 1.0 a www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com 4 document number: 72740 s11-0303-rev. c, 28-feb-11 vishay siliconix DG2715, dg2716 typical characteristics (t a = 25 c, unless otherwise noted) r ds(on) vs. v com vs. 1 v cc supply current vs. temperature leakage current vs. temperature 0.5 0.6 0.0 0.1 0.2 0.3 0.4 0.7 0.8 0.9 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 v d (v) r ds(on) ( ? ) v+ = 1.8 v, i no/nc = 10 ma v+ = 2.7 v, i no/nc = 100 ma - 40 - 20 0 2 0 4 0 6 0 8 0 100 10000 100 1 temperature (c) 10 v sup = 3.6 v , v in = 0 v 1000 i cc supply current (pa) v sup = 3.6 v , v in = 3.6 v - 50 - 25 0 2 5 5 0 7 5 100 1 100 leakage current (pa) temperature (c) 10 000 10 i no/nc(of f) v+ = 3.3 v 1000 i com(of f) i co m(on) r ds(on) vs. v d , v cc and temperature switching frequency vs. supply current leakage current vs. analog voltage 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 v cc = 1.8 v 85 c, 25 c and - 40 c r ds(on) ( ? ) v d (v) v cc = 2.7 v 85 c, 25 c and - 40 c inout switching frequency (khz) 0 500 1000 1500 2000 2500 3000 3500 4000 0 2000 4000 6000 8000 10000 12000 power supply current (a) v+ = 3.6 v v in = 3.6 v - 2000 - 1500 - 1000 - 500 0 500 1000 1500 2000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 leakage current (pa) v+ = 3.3 v v com , v no , v nc - analog voltage (v) i co m(on) i com(of f) i no/nc(of www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 72740 s11-0303-rev. c, 28-feb-11 www.vishay.com 5 vishay siliconix DG2715, dg2716 typical characteristics (t a = 25 c, unless otherwise noted) switching time vs. v cc and temperature threshold vs. supply voltage 10 15 20 25 30 35 40 - 40 - 2 0 0 2 04 06 08 0 100 temperature (c) t on , t off - switching time (ns) r l = 50 ? , c l = 35 pf v cc = 1.8 v v cc = 3.0 v 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 v supply (v) input voltage (v) insertion loss, off-isolation vs. frequency charge injection vs. analog voltage - 90 - 20 10 frequency (khz) - 10 0 10 k 1 m 100 k 1 k 10 0 - 30 - 40 - 50 - 60 - 70 - 80 oirr, v+ = 3.6 v loss, oirr (db) oirr, v+ = 1.8 v loss - 50 - 40 - 30 - 20 - 10 0 10 20 30 40 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 v com - analog v oltage (v) q - charge injection (pc) v+ = 3.6 v v+ = 1.8 v www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com 6 document number: 72740 s11-0303-rev. c, 28-feb-11 vishay siliconix DG2715, dg2716 test circuits figure 1. switching time switch input c l (includes fixture and stray capacitance) v+ in no or nc c l 35 pf com logic input r l 300 ? v out gnd v+ 50 % 0 v logic input switch output t on t off logic ?1? = switch on logic input waveforms inverted for switches that have the opposite logic sense. switch output v ou t v co m r l r l r on 0.9 x v out t r < 5 ns t f < 5 ns v inh v inl = + figure 2. charge injection off on on in ? v out v out q = ? v out x c l c l = 1 nf com r gen v out nc or no v in = 0 - v+ in v gen gnd v+ v+ in depends on switch configuration: input polarity determined by sense of switch. + www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 72740 s11-0303-rev. c, 28-feb-11 www.vishay.com 7 vishay siliconix DG2715, dg2716 test circuits vishay siliconix maintains worldwide manufacturing capability. pr oducts may be manufactured at one of several qualified locatio ns. reliability data for silicon technology and package reliability represent a composite of all qualified locations. for related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?72740 . figure 3. off-isolation in gnd nc or no 0 v, 2.4 v 10 nf com off i so la tio n = 20 log v co m v no/ nc r l analyzer v+ v+ figure 4. channel off/on capacitance nc or no f = 1 mhz in com gnd 0 v, 2.4 v meter hp4192a impedance analyzer or equivalent 10 nf v+ v+ www.datasheet.co.kr datasheet pdf - http://www..net/
l c e 1 e 1 a 1 1 b -b- 23 54 -a- f 0.25 gauge plane d a e e a 2 package information vishay siliconix document number: 71871 16-jan-06 www.vishay.com 1
dim min nom max min nom max a 0.90 ? 1.10 0.035 ? 0.043 a 1 ? ? 0.10 ? ? 0.004 a 2 0.80 ? 1.00 0.031 ? 0.039 b 0.15 ? 0.30 0.006 ? 0.012 c 0.10 ? 0.25 0.004 ? 0.010 d 1.80 2.00 2.20 0.071 0.079 0.087 e 1.80 2.10 2.40 0.071 0.083 0.094 e 1 1.15 1.25 1.35 0.045 0.049 0.053 e 0.65bsc 0.026bsc e 1 1.20 1.30 1.40 0.047 0.051 0.055 f 0 ? 0.15 0 ? 0.006 l 0.10 0.20 0.30 0.004 0.008 0.012 7 nom 7 nom ecn: s-60035?rev. c, 16-jan-06 dwg: 5861 www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. www.datasheet.co.kr datasheet pdf - http://www..net/
|
